MIXING SYSTEMS ACCESSORIES
DUST CONTROL MITIGATION
UPPER SHROUD
MIXING SHROUD
SWIVEL GATE & EXTENDED HANDLE
DUST COVER
MIXING SYSTEM ENGINEERING CONTROLS FOR REDUCING DUST
A Safe Work Environment Starts with Mixing Systems that Reduce Respirable Dust on the Jobsite.
UPPER SHROUD
SPEC MIX developed Engineering Controls designed to increase jobsite productivity and worker safety. Providing a safe work environment starts with our systems’ ergonomically correct design and reducing exposure to respirable “nuisance” dust. The SPEC MIX Upper Shroud effectively mitigates a worker’s potential interaction with dust when charging silos. When utilized properly its unique design and construction allows for easy on-site set up and use.
AVAILABLE FOR THESE MIXING SYSTEMS:
– G7000
– TEN BAGGER
– SPLIT SILO
– LOAD N GO
– PA1000
– PA4000
MIXING SHROUD
The SPEC MIX Mixer Shroud is a durable poly-coated hood that attaches to the silo cone and covers the batch mixer to control mixing dust emissions. The Mixer Shroud has 3 settings to adjust the height of the shroud above the batch mixer giving easy access to view the interior of the mixer.
AVAILABLE FOR THESE MIXING SYSTEMS:
– G7000
– TEN BAGGER
– LOAD N GO
– PA1000
– PA4000
GRAVITY SYSTEM SWIVEL GATE & EXTENDED HANDLE
The key to mitigating a worker’s exposure to dust at the mixing station is to ensure the operator is positioned in a dust-free area. The SPEC MIX® Swivel Gate and Extended Handle, when used in tandem, allow the laborer to stay clear of mixing dust by giving them a 360° radius to operate and dispense material. In addition, the Extended Handle is specially configured to further distance a worker from the mixing dust. Both the SPEC MIX G7000 & TEN BAGGER Systems are uniquely adapted for these accessories that ensure worker protection and safety.
AVAILABLE FOR THESE MIXING SYSTEMS:
– G7000
– TEN BAGGER
D2W WORKHORSE: Dust Cover
The D2W Workhorse can be equipped with a vacuum system dust collection cover that eliminates most all mixing dust emissions. The cover is easy to install and connects to a standard wet/dry shop vacuum with a 6 gallon/6 HP motor. Once the vacuum is connected, just turn on the switch and start dispensing bags into the Workhorse hopper for dust-free mixing.