THE STANDARD FOR PREBLENDED MIXING..
The SPEC MIX® G7000 silo system is the ultimate contractor tool for maximizing the production and profitability of any workforce. The G7000’s design is simple, yet highly efficient when producing dry, cement-based products on site. Whether the project is small or large, the G7000 system will greatly reduce the cost of labor and the amount of waste (sand, cement, paper bags) common with conventional batching methods.
With the SPEC MIX system, every raw material is factory preblended, packaged in heavy-duty bulk bags and dispensed into the G7000 silo on site. There is no sand to shovel or pallets of bags to lift, break and discard. If the project requires masonry mortar, grout, concrete, shotcrete or stucco, the G7000 system will produce the product quickly and consistently to increase profits while decreasing a contractor’s labor and product liability.
LARGE CAPACITY SILO FOR HIGH PRODUCTION.
The SPEC MIX® Ten Bagger silo is ideal for the largest projects where high production at the mixing station is not a luxury—it is a necessity to meet the project’s scope. With up to a 10 bulk bag capacity, this silo feeds the largest crews for a longer period of time, yet its simple and compact design makes it easy to use on the tightest job site.
With the SPEC MIX system, every raw material is factory preblended, packaged in heavy-duty bulk bags, and dispensed into the Ten Bagger silo on site. There is no sand to shovel or pallets of bags to lift, break and discard. If the project requires masonry mortar, grout, concrete, shotcrete or stucco, the Ten Bagger system will produce the product quickly and consistently to increase profits while decreasing a contractor’s labor and product liability.
MAXIMUM MOBILITY. JOBSITE VERSATILITY.
The SPEC MIX® PA1000 Power Auger Delivery System is the ultimate system for maximizing a contractor’s efficiency by increasing the mobility and versatility of the material mixing station. This low profile unit holds one 3,000 lb (1,360.7 kg) bulk bag, and is easily loaded with a large skid steer or even a small single-stage forklift. Its base is the size of a standard pallet and weighs only 1,100 lb (498 kg) when empty.
The PA1000 system is suited for use with any size batch mixer or mixer-pump equipment. The compressed footprint makes it ideal for tight spaces, interior jobs, floor to floor multi-story applications, masonry fence and sound walls, interior cross walls, or anywhere that mixing station space is limited. The PA1000 optimizes productivity by keeping the mixing station close to the work zone.
Used with SPEC MIX preblended bulk bag products, this gas or electric powered material delivery system eliminates on site batching of materials, wasted product, wasted sand, labor, and disposing of paper bags. The PA1000 dispenses preblended mortar, grout, concrete, shotcrete or stucco into a mixer quickly, consistently and safely to decrease cost and increase profitability.
LOW PROFILE. HIGH VOLUME.
The SPEC MIX® PA4000 Power Auger Delivery System is engineered for dispensing all SPEC MIX dry, preblended products. This material delivery system is built to tackle interior and exterior masonry projects of all sizes. Contractor crews of any size will maximize their efficiency, productivity and safety with the PA4000 system by increasing the mobility and versatility of the material mixing station.
This low-profile compact unit holds up to 4 bulk bags each weighing 3,000 lb (1,360.7 kg). Loading the bulk bags with equipment as a small as a heavy duty skid steer or small single-stage forklift is safely and easily done from near ground level. With a footprint measuring 6 ft 1 in x 7 ft 9 in (1.9 m x 2.4 m) and weighing only 2,000 lb (907 kg) empty, the PA4000 is ideal for projects using masonry mortar, grout, stucco, shotcrete and any other preblended cementitious product from SPEC MIX, especially interior and exterior jobs with low height and weight restrictions.
Working with any size batch mixer or mixer-pump batching equipment, the PA4000 system optimizes productivity by keeping the mixing station in close proximity to the work zone and easily relocates with the crew. With optional gas or electric power, the PA4000 eliminates the labor of hand mixing materials, jobsite waste of cement, sand, and paper bags common with traditional mixing methods. The SPEC MIX PA4000 will dispense preblended cementitious products quickly with just the push of a button, consistently and safely—every time!
The SPEC MIX PA4000 Power Auger Delivery System is engineered to increase a contractor’s efficiency by providing a mobile system that dispenses material close to the craftsmen. This power auger unit can feed a batch mixer or mixer-pump at a rate of 9 cubic feet (0.25 cubic meters) of dry material in just 3 to 4 minutes, regardless of the product specified. The PA4000 eliminates the lifting and shoveling required for traditional mixing methods, and it even eliminates the extra labor required for handling premixed 80 lb (36.2 kg) bagged products. There are no more sand piles and pallets of bagged materials limiting your mobility and efficiency.
D2W CONTINUOUS MIXER
CONTINUOUS OUTPUT – CONSTANT QUALITY.
The SPEC MIX® D2W is the ultimate SPEC MIX silo material mixing system that provides contractors the flexibility and control they need for staging and managing they’re product needs. It functions like a miniature on-site batch plant that reduces labor and clean up, eliminates material waste, produces highly consistent product, and above all maximizes the productivity of any size crew. From masonry mortars and grouts to stucco and shotcrete formulas, the SPEC MIX D2W system is a contractor’s ideal solution for higher production and profitability.
Specifically designed to attach to a SPEC MIX G7000 or Ten Bagger silo, this continuous power mixing auger system utilizes a unique array of specialized mixing paddles and agitators. It folds and sheers any preblended cementitious product to efficiently hydrate the dried aggregate and mechanically work natural air into the material for maximum workability, open times and boardlife.
The patented mixing chamber, shaft and paddles resist cement sticking to them and the preset wash-out cycle allows the SPEC MIX D2W to self-clean in 2 minutes; there is no need to disassemble the mixer. There is no sand to shovel; bags to lift and risk of back injury and certainly no trash or dust at the mixer. If the project requires colored mortar, dry-pack deck mud, coarse grout or concrete repair products, the SPEC MIX D2W will produce the product quickly and consistently—all day, every day and it’s all done with the flip of a switch. With SPEC MIX you work smarter not harder!
D2W GAS POWERED CONTINUOUS MIXER
WORK ANYWHERE – MIX CONTINUOUSLY!
The SPEC MIX® D2W Continuous Mixing System with its Gas Powered Hydraulic Drive is the portable batch plant giving contractors the ability to mix large amounts of materials anywhere without needing any utilities—no electricity and no pressurized water line! Simply connect the D2W’s hose to its pump and a 200 gallon tank of clean water, start the gas powered hydraulic drive and the D2W Continuous Mixing System is capable of producing up to 10 cubic yards of material per hour. Once the water ratio is set the D2W continuously produces highly consistent, workable product with optimal open-time.
It’s the ultimate SPEC MIX Silo System that provides contractors the ability to complete projects in any remote location and the flexibility to mix most any SPEC MIX product whenever it’s needed. Whether the project calls for masonry mortar and grout, concrete, stucco or specialty products, the D2W Gas Powered system will mix around the clock quickly with zero waste—all day, every day—and it’s all done with the flip of a switch.
Having your own on-site, on-demand material production source greatly decreases labor and eliminates material waste while maximizing the efficiency, productivity and profitability of any size crew. There is no sand to shovel; bags to lift and risk of back injury and certainly no trash or dust at the mixer. The SPEC MIX D2W Continuous Mixing System & Gas Powered Hydraulic Drive unit gives you control when, where and how fast the job is completed!
MIX WHERE YOU WORK – CONTINUOUSLY!
The SPEC MIX® D2W Workhorse Continuous Mixing System is powered by a standard 120V circuit so you mix SPEC MIX products anywhere on site. Simply plug into a power outlet, connect to a strong and steady water source then flip on the switch and start breaking bags of SPEC MIX products for continuous, consistently mixed materials. This lightweight, highly mobile mixer puts out up to 1.5 cubic yards of mix per hour or small amounts of material to complete the job. When working indoor and outdoor, floor-to-floor, large projects or small, the D2W Workhorse is the system for high productivity and profitability.
The D2W Workhorse features a high speed, effective mixing action that hydrates preblended materials while entrapping the optimal workability and boardlife. The water is metered directly into the system to achieve a constant water to cement ratio that ensures superior color uniformity, bond strength and compressive strength. It’s the simple, innovative material delivery system that mixes a wide range of products with incredible consistency, is easy to use, and cleans up in a minute or less. The D2W Workhorse is a contractor’s solution for locking in quality control and improving daily production!
The design and performance of the D2W Workhorse is the contractor solution for increased profitability. It allows you the opportunity to mix material within feet of your craftsmen—with minimal setup, labor and zero waste—while continuously producing a high quality mix. Weighing 210 pounds (95 kg) the D2W Workhorse moves about a jobsite like a wheelbarrow, can fit on a standard pallet, or can easily be transported in a pickup truck from job to job. It’s the portable mixing station designed for an endless list of products and project applications.